Research and Development: Difference between revisions

From Space Station 14 Wiki
m (xenoarcheology refernece)
(Move xenoarcheology up to the top and add point generation blurb)
Line 1: Line 1:
== Research and Development ==
== Research and Development ==
Research and Development (commonly called R&D or RnD) is the job of the [[scientist|scientists]]. The department typically lies behind purple and grey doors. In the department typically exists a set of Lathe and R&D machines. Often you will see lockers with lab equipment in them.
Research and Development (commonly called R&D or RnD) is the job of the [[scientist|scientists]]. The department typically lies behind purple and grey doors. In the department typically exists a set of Lathe and R&D machines. Often you will see lockers with lab equipment in them.
== Point Generation ==
Research points can be acquired through a few different sources. Most commonly, points are gained passively from a Research Point Source, which produces a constant low stream of points to the selected server. Points can also be acquired through research disks, which can be found in maintenance, salvaged from space, or given as a result of identifying a disease.
The most profitable form of point generation is [[Xenoarcheology]], which is the process of analyzing and activating different randomly generated artifacts, the process of which makes up a majority of the activities of the science team.


== Equipment ==
== Equipment ==
Line 187: Line 192:
=== Plan of action ===
=== Plan of action ===
Your main priority at the start of the round is to use the RD computer to research medical machinary & basic parts manufacture , and then everything else. Then it's recommended that you build cloning pods for medbay  , chemical dispensers and ChemMasters for chemistry <s> or just hoard them and hand out tricord foam bombs to clowns</s>.
Your main priority at the start of the round is to use the RD computer to research medical machinary & basic parts manufacture , and then everything else. Then it's recommended that you build cloning pods for medbay  , chemical dispensers and ChemMasters for chemistry <s> or just hoard them and hand out tricord foam bombs to clowns</s>.
== Well, how do I get points? ==
You need to preform [[Xenoarcheology]], refer to that page for more.


== Troubleshooting ==
== Troubleshooting ==

Revision as of 02:57, 29 November 2022

Research and Development

Research and Development (commonly called R&D or RnD) is the job of the scientists. The department typically lies behind purple and grey doors. In the department typically exists a set of Lathe and R&D machines. Often you will see lockers with lab equipment in them.

Point Generation

Research points can be acquired through a few different sources. Most commonly, points are gained passively from a Research Point Source, which produces a constant low stream of points to the selected server. Points can also be acquired through research disks, which can be found in maintenance, salvaged from space, or given as a result of identifying a disease.

The most profitable form of point generation is Xenoarcheology, which is the process of analyzing and activating different randomly generated artifacts, the process of which makes up a majority of the activities of the science team.

Equipment

R&D Computer

RDComputer.png

The R&D computer at the start of the Round with no technologies researched.

In the R&D computer new technologies can be unlocked via points. To research a technology, click on it if it's in the Unlockable technologies column. Technologies in the Future technologies are locked behind others, requiring you to research a previous technology (in the Unlockable technologies column). Technologies in the Unlocked technologies section have already been researched.

Autolathe

Autolathe.png

The Autolathe doesn't require any research but only makes engineering and botanical tools as well as low-voltage cables. Requires plastic, steel and glass to use.

Example recipes:

Airlock Painter
Crowbar A tool that is needed to pry open unpowered doors.
Gas Analyzer
Global Positioning System A hand-held device used to see what the GPS coordinates are of your position in the map.
LV cable coil A piece of wire that can be used to connect powerered objects to an APC. Refer to Power
Minihoe A tool that is used by a Botanist to remove weeds from a Hydroponics Tray
Multitool A tool that can be used for Hacking
Screwdriver A tool that is needed to open/close panels of devices such as doors. It is also needed when building some items.
Shovel A tool that is used by a Botanist to remove plants from a Hydroponics Tray
Spade A tool that is used by a Botanist to remove plants from a Hydroponics Tray
T-Ray Scanner A tool that shows underground wires and pipes.
Utility Belt A belt that stores Engineering tools
Welding Tool A tool that enables objects to be welded open/closed. Welded items must need a Welding Tool to be unwelded. It is also needed when building some items.
Wirecutter A tool that enables you to cut wires of powered devices such as doors and vending machines. Refer to Hacking. You may also need to cut wires of some objects as part of their deconstruction process.
Wrench A tool that enables you to anchor / unanchored objects. Anchored objects cannot be moved until unanchored. Unanchored objects are unpowered.

Protolathe

Protolathe.png

The Protolathe is a machine capable of printing most of what you've researched. It can make things such from beakers or ammo. Requires steel, glass and sometimes plastic to use.

Note that for some machines (such as the Cloner), higher quality parts can be used to improve the quality of the machine. For example low quality components for a Cloner results in a 50% chance of failure to clone. A low-capacity power cell has less charge than a high-capacity power cell.

A lot of the parts available in the Protolathe are used to craft something. Use the Craft hotkey to open the Craft dialog. By default this should be 'G'.

Example recipes:

Image Name Description
Advanced Capacitor
Advanced Matter Bin
Advanced Scanning Module
Air Alarm Electronics A component needed to make an air alarm
APC Electronics A component needed to make an APC (power unit)
Appraisal Tool A tool used by Cargo Technicians to see how much each object can be sold for.
Bottle A glass bottle container that can hold a small amount of liquid. Used by chemists to store chemicals. Can be drunk from.
Bucket Can contain liquid that is spilled if you trip. You can drink out of a bucket and extract liquid into it from other containers. Used by Botanists and Janitors.
Butcher's Cleaver A tool that Chefs use to butcher corpses for meat
Capacitor
Cautery
Chemical Payload A component needed to make a modular grenade
Conveyor Belt When connected to a lever, it can be used to move objects in a single direction as dictated by the lever. Commonly used in Cargo and the Disposal -> Recycling circuit.
Door Electronics A component needed to make a door
Drill
Drone
Fire Alarm Electronics A component needed to make a fire alarm.
Fire Extinguisher
Firelock Electronics A component needed to make a Firelock door.
Flashlight Provides a cone of light infront of the holder that is much more illuminating than a PDA. Uses charge from a power cell. Left click to turn on and off.
Flourescent Light Tube Light tube for lights on the walls of the station.
Glass
Handheld Crew Monitor A tool used by the Chief Medical Officer and other medical staff to see the coordinates and vitals of crew staff that have turned on the associated sensors in their jump suits.
Hatchet A tool used by Botanists used to cut down trees such as apple / banana trees to harvest wood and fruit.
Hemostat
High-Capacity Power Cell A battery used to power some tools like a flashlight. Chargeable by a Power Cell Charger
High-Power Micro-Laser
Holofan Projector A component needed to make a Holofan
HV Cable Coil High Voltage wire. Used to connect power generation to power storage by Engineers.
Incandescent Light Bulb Light bulb for lights on the walls of the station
Kitchen Knife A knife used by Chefs
Left Borg Arm Used to create Bots such as the MedBot.
LV Cable Coil Low Voltage wire. Used to connect APC units to machines such as vending machines, chemistry machines, lights, auto-doors by Engineers.
Mailing Unit Electronics A component used to create a mailing unit.
Matter Bin
Medium-Capacity Power Cell A battery used to power some tools like a flashlight. Chargeable by a Power Cell Charger
Metal Saw
Micro-Laser
Micro-Manipulator
Mop A tool used by Janitors to mop up liquid spillages from floors.
MV Cable Coil Medium Voltage wire. Used to connect power storage to APC units by Engineers.
Nano-Manipulator
Plastic
RCD Ammo
Reinforced Glass
Remote Signaller
Right Borg Arm Used to create Bots such as the MedBot.
Scapel A tool for doctors
Scanning Module
Scythe A tool used by Botanists to harvest some types of plants from a Hydroponics tray
Shovel A tool used by Botanists to clear a Hydroponics tray contents
Signal Trigger A type of trigger for a bomb / grenade
Small-Capacity Power Cell A battery used to power some tools like a flashlight. Chargeable by a Power Cell Charger
Spray Bottle Can hold a little liquid that can be sprayed onto a sentient or floor. Commonly used to hold space cleaner or weed killer. A chemist can fill this with the desired liquid.
Steel
Timer Trigger A type of trigger for a bomb / grenade. The default timer is 5 seconds.
Voice Trigger A type of trigger for a bomb / grenade

Circuit Imprinter

CircuitImprinter.png

The Circuit Imprinter is a machine capable of printing machine boards used for creating machines and computers. They require steel, glass and sometimes gold.

Plan of action

Your main priority at the start of the round is to use the RD computer to research medical machinary & basic parts manufacture , and then everything else. Then it's recommended that you build cloning pods for medbay , chemical dispensers and ChemMasters for chemistry or just hoard them and hand out tricord foam bombs to clowns.

Troubleshooting

"I can't get any points/I can't print anything"

The likely cause is that the RD Computer/Protolathe isn't synced up with the RD server.

To fix this in the RD Computer/Protolathe click Server list, click on ID x || RDSERVER and then exist the window. Now when you click Sync it should (hopefully) work.